Kreg Pocket Hole Tools and Supplies

• 1 1/4” Pocket Hole Screws - For 3/4” thick material

• Kreg Jig K4 Master System - Everything you will ever need to start building furniture with pocket hole joinery

• Kreg Right Angle Clamp - for assembling boxes and right angles

Power and Battery Saws

• Grizzly G0691 - 10" 3HP 220V Cabinet Table Saw.- My heavy duty Professional Grade Table Saw.

• RIDGID Pro Jobsite Table Saw - I have the older version of this saw and it is great. Accurate, Powerfull, and Perfect for smaller shops or as your first table saw. I’d be 100% OK if this was my only table saw.

• Makita 36v Cordless Track Saw - Perfect for processing sheet goods, and large slabs. I chose the Makita over Festool and other brands and would do so again for the value and quality it offers.

• Makita 10” Dual Bevel Miter Saw - I love my old RIDGID Mitersaw but it’s been discontinued. When I have to replace it it will be with this.

Glues, Epoxies, and Adhesives

• Titebond 2 - The only wood glue you really need

• The Glu-Bot - This is an empty bottle for glue but it’s super handy and I have 2 currently

• DAP Rapid Fuse - I’ve tried a lot of “super-glues” this is my favorite

• West Systems Epoxy - This is my go to Epoxy for filling voids in live edge slabs

PPE and Safety

• The Best Disposable Gloves - Venom Steel Nitrile Disposable Gloves (Size Large)

• Alternate Disposable Gloves - These are good just not as good as Venom, but they’re in stock more often

• 3M 6000 Series Respirator -

• 3M Replacement Filters for 6000 Series Respirator

Hand Saws and Tools

• Irwin 7 1/4” Dovetail Pull Saw

• Irwin Coping Saw

Measuring and Marking Tools

• Fast Cap Left/Righty 16ft Tape Measure - This is my everyday tape measure.

• Fast Cap Metric/Standard 16ft Tape Measure - While I don’t use this everyday you need something with metric these days.

• Empire Speed/Rafter Square - While not a true woodworking tool this is still my favorite style of square.

• Empire 12” Combination Square - So many uses it’s hard to list

• Johnson T-Bevel or Bevel Gauge - Helps you lay out or determine angles.

Hardware

• Side Mount Soft-Close Drawer Slides

• Undermount Soft-Close Drawer Slides 

• 6 and 8 foot Barn Door Hardware Kit

• Murphy Bed Hardware Kit

Dust Collection Automation

• Automatic Vacuum Switch - starts the vacuum automatically when the tool is turned on.

• Remote Controls - Start your vacuum or other 120v tools with this cheap remote. Lots of ways to set this up.

Recommended Saw Blades, Router Bits, etc.

• My Favorite 10” Table Saw Blade - Freud 50-tooth ATB Combination Blade. This is a full-kerf blade which I prefer. I use this blade for all my cuts.

• 10-inch Mitersaw Blade - Freud 60-tooth thin kerf sliding miter saw blade.

• 12-inch Mitersaw Blade - Freud 80 tooth thin kerf sliding miter saw blade

• Makita Track Saw Blade - I use this one blade for finish cuts on plywood and jointing 6/4 hardwood. This blade is the best blade for the Makita Track saw.

• Yonico 70-piece Router Bit Set - This value priced set will set you up with every bit you’ll need and is amazing quality. Get the 1/2” shank or 1/4” shank depending on your router. You can upgrade to premium brands as you wear out the ones you use